|
| |
|
| |
 |
|
|
| |
|
| |
|
|
|
| |
|
Warren Additives |
| |
|
| |
| Engine Flush |
| |
|
 |
PART NO. 14609 12OZ. 12/CASE
Dissolves sludge, improves oil circulation and cleans engines in 5 minutes.
COMPETITION: Gunk, McKay, Wynn’s, Gold Eagle
PRODUCT DESCRIPTION: Warren’s Engine Flush is a crank case cleaner. While some products are only solvent, Warren’s Engine Flush also contains a special residue solubilizer and a high quality oil. IT’S USE: Engine Flush is poured into the crankcase in the same location where motor oil is added. The engine should have a normal fill of oil when the flush is added. After the flush has been added, the car should be allowed to idle for 5 minutes; the car should not be driven. The oil should then be changed in the normal manner. The oil filter should be replaced and new oil added. Always follow label instructions.
Material Safety Data Sheets |
| |
|
| Fuel Injector Cleaner |
| |
|
 |
PART NO. 14684 12OZ. 12/CASE Cleans Injectors In One Treatment Re-stores Engine Performance One Treatment Lasts Up to 5,000 Miles Helps in Reducing Emissions Contains a Corrosion Inhibitor Contains No Alcohol Safe For Oxygen Sensors and Catalytic Converters COMPETITION: STP, Super X, One Shot PRODUCT DESCRIPTION: Fuel Injector systems are designed to deliver precise amounts of fuel and air to the combustion chamber of an engine. A major problem that prevents the proper delivery of the fuel air mixture are deposits, throughout the fuel system. Warren Fuel Injector Cleaner is designed to dissolve all deposits and varnish build-ups in the fule injectors and fuel system. Fuel injector cleaners may be either petroleum based or alcohol based. Alcohol based products can dry out o-rings used in fuel injectors. Warren’s Fuel Injector Cleaner is a petroleum based product. Petroleum based products are more effective at dissolving deposits that accumulate in the fuel system. Waren Fuel Injector Cleaner contains an ashless non-phosphorous polymeric dispersant for deposit control and a corrosion inhibitor. Warren Fuel Injector Cleaner contains a fluidizer oil and detergent that prevents deposits from adhering to hot metal surfaces. Treats 15 to 21 gallons. Pour entire contents into fuel tank. A second treatment may be necessary for very plugged systems. Use every 5,000 miles.
Material Safety Data Sheets |
| |
|
| Gas Treatment |
| |
|
 |
PART NO. 14679 12FL. OZ. 12/CASE Dissolves Sludge Prevents Fuel System Corrosion Cleans Carburetors, Intake Valves and Manifolds Protects Against Gas Line Freeze Safe for Oxygen Sensors and Catalytic Converters COMPETITION: STP Carburetor Cleaner, Stewart Warner CD2 PRODUCT DESCRIPTION: Most cars are designed to operate using 87R + M/2 gasoline. As a car ages the car will start to knock, sputter and hesitate due to build up of sludge, gum, varnish and moisture. All of these wither restrict fuel flow or contaminate the gasoline. Warren Gas Treatment removes sludge, gum, varnishes and reduces water in the fuel system. Warren Gas Treatment also contains an ingredient that prevents deposits from adhering to hot surfaces. This removal of contaminates will increase fuel economy, smooth rough idle, and help stop knocking. There are two types of gas treatment products: petroleum based and alcohol based. Warren and STP are petroleum based. Stewart Warner is alcohol based. Petroleum based products are more effective at dissolving deposits in carburetors. An easy way of distinguishing the two types is to look for the “DANGER: May be fatal or cause blindness if swallowed” statement on the front label of product containing methanol.To properly treat the gasoline, add one bottle of Warren Gas Treatment to the fuel tank before filling with gasoline. One bottle treats 15 to 21 gallons.
Material Safety Data Sheets |
| |
|
| Fuel Injector & Carburetor Cleaner |
| |
|
 |
PART NO. 14695 12 FL. OZ. 12/CASE Cleans injectors, Intake Valves and Carburetor Reduces Emissions Protects Against Gas Line Freezing Contains No Alcohol Can Be Used With Every Fill Up Safe For Oxygen Sensors and Catalytic Converters COMPETITION: STP, Berryman PRODUCT DESCRIPTION: Over a period of time, automotive fuel systems will build up deposits, sludge & varnish. This build up will cause the engine to run sluggish, hesitate, lose power and reduce fuel economy. Warren Fuel Injector & Carburetor Cleaner is designed to be used to increase power and fuel economy. Warren Fuel Injector & Carburetor Cleaner is a petroleum based product. Treats 15 to 21 gallons. Pour entire contents into tank with every fill up.
Material Safety Data Sheets |
| |
|
| Oil Treatment |
| |
|
 |
PART NO. 14624 12 FL. OZ. 12/CASE Reduces Oil Burning Quiets Noisy Engines Increases Compression Improves Viscosity Index of Oil Decreases Friction COMPETITION: STP, Wynns, PYROIL PRODUCT DESCRIPTION: Older worn engines will develop low compressions, blow by, smoking noise and oil burning as systems of age. Warren Oil Treatment will help in reducing, if not alleviating, these symptoms. Warren’s Oil Treatment contains a synthetic polymer and additives which will improve the viscosity index of motor oil. Warren Oil Treatment will coat moving parts with a tough film that decreases friction and increases power. Add one bottle of Warren Oil Treatment with every oil change. Also, add one bottle between changes whenever oil is added. Allow engine to reach operating temperatures then pour into crankcase. For badly worn engines add two bottles.
Material Safety Data Sheets |
| |
|
| Gas Tank Treatment |
| |
|
 |
PART NO. 12952 12FL. OZ 12/CASE Keeps Water from Freezing in the Fuel System Stops Gas Line Freeze Safe for Sensors and Catalytic Converters COMPETITION: Radiator Specialty, Wynns PRODUCT DESCRIPTION: Warren Gas Tank Treatment with Antifreeze in a general purpose gas additive that absorbs moisture that may be in the fuel line. Note: This product is recommended for use with carburetor fuel systems. Add one 12 fl. Oz. Bottle to tank prior to filling up. This will ensure good mixing of product. Product is OK to use year round if vehicle is in high humidity area causing condensation in fuel tank.
Material Safety Data Sheets |
| |
|
| Octane Booster |
| |
|
 |
PART NO. 14688 12FL. OZ. 12/CASE Helps Reduce Knocks and Pings From Low Octane Fuel Increases Fuel Economy and Performance Helps in Cleaning Fuel Systems Contains No Alcohol Safe For Oxygen Sensors and Catalytic Converters COMPETITION: STP, Berryman PRODUCT DESCRIPTION: As cars age, their performance tends to diminish, due to deposits throughout the fuel systems. These deposits will tend to cause low octane gasolines to perform less than desirable. Warren Octane Booster will improve the octane rating of gasoline increasing performance, gas mileage and helps in stopping knocks and pings. Warren Octane Booster does not contain alcohol, therefore will not damage catalytic converters and oxygen sensors. Good for both leaded and unleaded fuels. IT’S USE: Pour entire contents into gas tank. Treats up to 20 gallons.
Material Safety Data Sheets |
| |
|
| Diesel Fuel Conditioner |
| |
|
 |
PART NO. 15002 12OZ. 12/CASE Cetane Improver Keeps Injectors Clean Disperses Moisture Anti-Gelling Agent Prevents Sludge Contains No Alcohol Contains No Dyes COMPETITION: STP PRODUCT DESCRIPTION: Diesel fuel is a relatively unstable fuel. If left untreated, it will start to oxidize-forming sludge and varnish in the fuel system. During cold months this will contribute to gelling and wax formation. Warren Diesel Fuel Conditioner will treat the diesel fuel to prevent the above mentioned from occurring. It will also clean the injecters, prevent rust and corrosion and best of all it is a CETANE IMPROVER. Part # 15002 will treat 20 gallons. Add the entire contents to fuel tank when filling up.
Material Safety Data Sheets |
| |
|
| Engine Stop Leak |
| |
|
 |
PART NO. 14625 12 FL. OZ. 12/CASE Completely Compatible with all Motor Oils Contains No Solids Reduces Oil Leaks from Seals and Gaskets Keeps Seals and Gaskets, Soft and Pliable COMPETITION: Radiator Specialty, Wynns, Pyroil, CD-2 PRODUCT DESCRIPTION: Warren Engine stop Leak is a specially formulated oild additive designed to reduce or eliminate oil leaks from old worn out seals and gaskets, that have shrunk due to temperature or wear. Elastomeric seals contacted by hot oil tend to shrink, harden and become less pliable, as a result oil begins leaking out. One alternative is to replace all the leaking seals, another is to add Warren Engine Stop Leak. Warren Engine Stop Leak contains a synthetic seal swell additive to swell seals back to their original size and helps them regain pliability. This product contains no solids that can plug oil filters and small engine oil passage ways. To stop leaks, add entire contents of bottle to engine oil crankcase (consult owner’s manual for fill location). If leakage does not stop after 100 miles, have engines examined by a professional (the seals am be cracked or broken and should be replaced).
Material Safety Data Sheets |
| |
|
|
|
| |
|
|
